- Composite
- Reinforcements
- Matrices
- Part
Composite Materials and Industrial TechnologiesAdvanced materials.
High performance.
We supply the raw materials and process consumables that composite manufacturing needs from a single source, supporting advanced production technologies with reliable material solutions.
One carries, the other binds.
We help you reach the optimal matrix and reinforcement combination for your target properties and your production method.
Reinforcement + Matrix = Composite
Vacuum Infusion MaterialsFiber carries the load.
We become part of your solution with the right areal weight, specification, form and fiber type for your project.
PrepregDry FabricUDCarbonGlass
ReinforcementsResin binds the fibers.
Together we define the right resin system for your target performance, with the viscosity and cure profile your process requires.
EpoxyPolyurethaneVinyl Ester
MatricesThe cure locks in the value.
To enable your production of high-value parts with new properties at the macro level, we share the benefits of our qualified, continuous and international supply chain with you.
Where can we support you?
The Sencronom Supply Table
Every composite need, in one table. Select a tile.
High-performance reinforcement known for its exceptional strength-to-weight ratio and stiffness.
Fibers & cores
Resins & adhesives
Vacuum and process consumables
Process–Product Matching Algorithm
Define your manufacturing method, process conditions and technical requirements. Use our algorithm to assess how well products fit your process.
Start MatchingYou produce. We supply.
One partner and one point of accountability, from analysis to delivery.
Discovery and Analysis
We get to know your production line and analyze it in the depth it needs, so we are fully aligned with you.
Selection
We present the best-fit options from our international supply chain pool.
Planning and Approval
We share our strategic supply plan and sustainable resource management system with you.
Logistics and Delivery
We carry out the operation reliably, in line with your technical specification.
Custom projects and kitting
Kitting prepares the entire composite material of a product, such as a UAV, part by part: carbon fabric, foam core and airfoil ribs, resin and vacuum infusion consumables. We turn your project into a layup plan with parts, tooling and product codes, and ship the kits set by set to the same recipe.
Part and tooling data
Layup plan with Sencronom product codes
Kit shipment and tracking, set by set
Industries we supply with composite materials and raw materials across Türkiye
We supply factories, shipyards and production facilities at industrial scale, by the roll, box, drum and pallet.
Composite raw materials and consumables for aerospace
Autoclave · Prepreg · Vacuum bagging
For manufacturers curing in autoclaves and ovens, we supply prepreg and dry carbon fiber fabric in one plan with vacuum bagging film, peel ply and sealant tape rated for the cure temperature.
| Material | Specification | Order unit | Request |
|---|---|---|---|
| Vacuum bagging film (nylon)Temperature grades for autoclave and oven cure | Temperature grades for autoclave and oven cure | Roll | |
| Peel plyNylon and polyester | Nylon and polyester | Roll | |
| Sealant tapeHigh-temperature, autoclave grade | High-temperature, autoclave grade | Box | |
| Prepreg and dry carbon fiber fabricTwill, plain and UD | Twill, plain and UD | Roll | |
| Adhesive filmStructural assembly | Structural assembly | Roll |
Prepreg or dry fabric: which should you choose?
Prepreg arrives pre-impregnated with a controlled resin content, is cured in an autoclave or under a vacuum bag, and is stored in a −18 °C cold chain. Dry fabric meets the resin during infusion or RTM. We make the choice with you based on the part, your curing capability and production volume.
Which vacuum bagging materials does an autoclave cure require?
Vacuum bagging film rated for the cure temperature, peel ply, perforated release film, breather and high-temperature sealant tape. We plan them all in the same temperature grade, in a single shipment.
Composite raw materials and consumables for automotive
RTM · Vacuum infusion · Prepreg
For series production, we plan carbon fiber fabric rolls, epoxy systems suited to infusion and RTM, and structural polyurethane adhesives around your line rate.
| Material | Specification | Order unit | Request |
|---|---|---|---|
| Carbon fiber fabric200 g/m² twill, 3K and 12K options | 200 g/m² twill, 3K and 12K options | Roll | |
| Carbon aramid hybrid fabricImpact resistance | Impact resistance | Roll | |
| Infusion and RTM epoxy systemsLow viscosity | Low viscosity | Drum | |
| Polyurethane adhesive and resinStructural bonding | Structural bonding | Drum | |
| Gelcoat and topcoatSurface finish | Surface finish | Drum |
Carbon fabric: how do you choose between 3K and 12K, twill and plain?
3K twill stands out on visible parts for its fine weave and surface appearance; 12K fabric reaches thickness with fewer plies, so it is preferred for structural parts. Twill drapes into the mold more easily, while plain weave is more stable.
How is supply continuity ensured in series production?
We map your annual demand and line rate at the planning stage and manage raw materials and consumables on the same schedule. Shipments arrive traceable, with the manufacturer's batch numbers and documentation.
Composite raw materials and consumables for the energy sector
Vacuum infusion · Sandwich construction
For large structures such as wind turbine blades, we bring multiaxial glass fabric, infusion epoxy, foam core and wide-width vacuum bagging film together on a single schedule.
| Material | Specification | Order unit | Request |
|---|---|---|---|
| Multiaxial glass fabricBiaxial and triaxial, stitched | Biaxial and triaxial, stitched | Pallet | |
| Infusion epoxy systemLow viscosity for large parts | Low viscosity for large parts | Drum | |
| Foam corePVC foam, sandwich construction | PVC foam, sandwich construction | Pallet | |
| Infusion flow meshResin distribution | Resin distribution | Roll | |
| Wide-width vacuum bagging filmLarge molds | Large molds | Roll |
Which composite materials are used in wind turbine blades?
The shells are mostly multiaxial glass fabric and epoxy; sandwich areas use foam or balsa core, and the spar caps of long blades use carbon fiber. The shells are usually produced by vacuum infusion.
Which consumables does vacuum infusion of large molds require?
Wide-width vacuum bagging film, infusion flow mesh, peel ply, breather and sealant tape. We plan roll width and quantity around your mold size and ship them with the raw materials in a single delivery.
Composite raw materials and consumables for marine and yacht building
Vacuum infusion · Sandwich construction · Hand lay-up
For boat and yacht production, we supply glass fiber, vinyl ester and epoxy resin, gelcoat, foam core and infusion consumables to match the shipyard's work plan.
| Material | Specification | Order unit | Request |
|---|---|---|---|
| Biaxial and triaxial glass fabricStitched fabric | Stitched fabric | Pallet | |
| Vinyl ester resinWater and osmosis resistance | Water and osmosis resistance | Drum | |
| GelcoatMarine surface protection | Marine surface protection | Drum | |
| Foam corePVC foam and honeycomb | PVC foam and honeycomb | Pallet | |
| Wide-width vacuum bagging filmLarge hull molds | Large hull molds | Roll |
Vinyl ester or epoxy: which is right for a boat hull?
Vinyl ester is preferred especially in the outer layers for its water and osmosis resistance; epoxy delivers the highest strength and the lowest water permeability. We choose the resin system with you, considering gelcoat compatibility and target performance.
Which core materials are used in sandwich boat structures?
PVC foam and honeycomb cores are common in deck and hull panels; thickness and density are chosen to meet load and weight targets. We supply the core in the same plan as the glass fiber and resin.
Composite raw materials and process consumables for the defense industry
Prepreg · Autoclave · Vacuum bagging
For high-performance applications we supply aramid and hybrid fabric, adhesive film and high-temperature consumables at project scale.
| Material | Specification | Order unit | Request |
|---|---|---|---|
| Aramid fabricImpact and heat resistance | Impact and heat resistance | Roll | |
| Carbon aramid hybrid fabricImpact resistance | Impact resistance | Roll | |
| Adhesive filmStructural bonding | Structural bonding | Roll | |
| Vacuum bagging film (nylon)Temperature grades for autoclave and oven cure | Temperature grades for autoclave and oven cure | Roll |
Which materials do you supply for defense projects?
Aramid and hybrid fabric, adhesive film and vacuum bagging consumables suited to autoclave cure. Quantity and delivery schedule are set per project.
Which documents come with a delivery?
Each material comes with the manufacturer's technical data sheet (TDS) and safety data sheet (SDS); batch and conformity documents can be requested to suit project requirements.